Note: Each country’s vehicle model and name are different. Please take the photo as the standard. Do not understand. Please contact us.
Introduction:
Product Name: Headlight shell
Production process: PC hardening high temperature injection molding
Product material: PC material
Fit for: for Audi A3 S3 2017 2018 2019 2020
Need other models, please leave a message. (If you buy 5 more, we will get a discount)
High-end craftsmanship. Ensure quality.
advantage:
1: Original car mold.
2: Antioxidant.
3: High temperature resistance.
4: Highly transparent.
5: Easy to install.
installation:
1. If you have a better oven.
Simply remove the back cover of the luminaire and bulb.
Put in oven and warm to 80 Celsius Heat for 10 minutes and the glue softens.The lamp is separated from the lamp housing.
2: If you don’t have an oven. you must use a heat gun. which heats the sharpest corner of the headlights for a while. and
Insert the screwdriver after the glue has softened. (Note: Don’t use too many forums to avoid damage. when preparing for gloves
Touch. still have a little heat. stop heating. Make sure the temperature is not too high to avoid damage
Faris
4: After heating for a long time, quickly open the corner, don’t forget to wear gloves (gloves should be clean. can not be discarded)
5: All goes well. the efficiency is higher. and one room is heated. one minute is enough. If it doesn’t go well. Continue one
Heat a separate part with a heat gun. The glue is soft. Quickly separate.
6: After separation. try your best. Clean the glue in the glue tank. Put on gloves and start installing new bulbs
7: Apply glue to the fuel tank with glue. Glue should be moderately serviced. About 2/3
8: Install a new lamp cover. A small amount of glue will overflow during installation. It can’t be processed first. After glue
drought. Handle the blade. The pinna glue and the friction surface are made of cloth.
At the end of the assembly, we need to air dry for 3-5 days and we need a few days. Reload the car. And can’t wash or rain in a week.
评价
目前还没有评价